PV3000 VHM Series (5KW)
Low Frequency Off Grid Solar Inverter 5KW | PV 245V | MPPT 80A | DC 48V
PV3000 VHM series is very economical pure sine wave solar inverter, Inbuilt with 80A MPPT charger; Solar/AC priority is configurable, when setting solar priority, solar will charge batteries as first priority, and AC can also charge batteries when solar charger current is too lower, in this way system charge is optimazed best. it enables inverter to operate with all kinds of home appliances.
3 Steps charging
Overload and short-circuit protection
Set charging voltage/charging current
Battery low voltage shutdown point can be set to 10/10.5/11/11.5/12V
Power-save mode
Set utility priority /battery priority
Set utility input wide/narrow voltage range
Inverter voltage can be set to 220V/230V/240V
Inverter frequency can be set to 50Hz/60Hz
Set utility charging on/off switch
Inbuilt 80A MPPT Solar Charge Controller
Acid or Lithium Select
WIFI remote monitoring (optional)
With the BMS lithium battery communication function (CAN port)
| MODEL | PV30-5KW VHM |
|---|---|
| Nominal Battery System Voltage | 48VDC |
| INVERTER OUTPUT | |
| Rated Power | 5 KW |
| Surge Rating | 15000VA |
| Capable Of Starting Electric Motor | 3HP |
| Waveform | Pure sine wave / same as input (bypass mode) |
| Nominal Output Voltage RMS | 220V / 230V / 240VAC (±10% RMS) |
| Output Frequency | 50Hz / 60Hz ±0.3Hz |
| Inverter Efficiency (Peak) | >88% |
| Line Mode Efficiency | >95% |
| Power Factor | 1.0 |
| Typical Transfer Time | 10ms(max) |
| Overload | 100% < Load < 110% (alarm 5min then stop output and fault code 07) 110% < Load < 125% (alarm 60s then stop output and fault code 07) Load > 125% (alarm 10s then stop output and fault code 07) |
| AC INPUT | |
| Voltage | 230VAC |
| Selectable Voltage Range | 155~265VAC(For personal computers) |
| Frequency Range | 50Hz / 60Hz(Auto sensing) 40~80Hz |
| BATTERY | |
| Minimum start voltage | (10V / 10.5V / 11V / 11.5V/ 12V )+0.5V for 12VDC mode (*2 for 24VDC, *4 for 48VDC) |
| Low Battery Voltage Alarm | (10V / 10.5V / 11V / 11.5V/ 12V )+0.5V for 12VDC mode (*2 for 24VDC, *4 for 48VDC) |
| Low Battery Voltage Cut Off | 10V / 10.5V / 11V / 11.5V/ 12V for 12VDC mode (*2 for 24VDC, *4 for 48VDC) |
| High Battery Voltage Alarm | (12-14.5V)+1V for 12VDC mode (*2 for 24VDC, *4 for 48VDC) |
| High Battery Voltage Recover | (12-14.5V)+0.5V for 12VDC mode (*2 for 24VDC, *4 for 48VDC) |
| Energy Saving Mode | Load ≤50±20W(120V)/100±20W(220V) |
| CHARGER | |
| Output Voltage | Depends on battery type |
| Overcharge Protection S.D. | 15.7VDC for 12VDC mode (*2 for 24VDC mode, *4 for 48VDC mode) |
| Maximum Charge Current | 35A |
| Input Voltage Waveform | Sine wave (grid or generator) |
| Nominal Input Frequency | 50Hz or 60Hz |
| Overload Protection (SMPS Load) | Circuit breaker |
| Output Short Circuit Protection | Circuit breaker |
| AC Input Breaker | 4-6K/50A |
| SOLAR CHARGER | |
| Maximum PV Array Power | 5000W |
| Maximum PV Charge Current | 80A±4A |
| DC Voltage | 24V/ 48V auto work |
| MPPT Range @ Operating Voltage | 30~230VDC @ 24V/ 60~230VDC @ 48V |
| Maximum PV Array Open Circuit Voltage | 245VDC |
| Standby Power Consumption | <2W |
| MECHANICAL SPECIFICATIONS | |
| Mounting | Wall Mount |
| Dimensions (W*H*D) (mm) | 305*531*202 |
| Package Dimensions (W*H*D) (mm) | 686*400*319 |
| N.W (kg) | / |
| G.W (kg) | / |
| OTHER | |
| Operating Temperature Range | 0°C to 40°C |
| Storage Temperature | -15°C to 60°C |
| Audible Noise | 60dB MAX |
| Display | LED+LCD |
| Standard Warranty | 2 year |
| CERTIFICATION & STANDARDS | |
| CE-EMC+LVD (EN6100-6-3:2007, EN6100-6-1:2017+EN IEC62109-1:2010, EN IEC62109-2:2011) |
